Flush series · Inground
LUMINI Flush 100
Solid brass well light set flush with the ground plane. Lamp not included.
Start a project enquiry →
Brass fitting shown seated in its buried PVC sleeve. The sleeve is black by design and sits below grade; only the brass face ring is visible once installed.
Application
An inground well light for lighting a wall, column or tree canopy from directly beneath, where a spike or surface fitting would be seen. The brass face ring sits flush in paving, gravel or turf and reads as a detail in the ground plane rather than as a fixture.
The fitting is serviceable from above. A buried PVC sleeve takes the excavation and the backfill load; the brass body drops into it and lifts back out for lamp changes without excavating the sleeve. Isolate the supply before servicing.
Photometrics follow the lamp. Beam angle, output and colour rendering are set by the MR16 fitted, so one housing covers narrow accent work through to a wider wash.
Start a project enquiry →Specification
| LUMINI reference | LM-FLS-100-BZ |
| Manufacturer reference | DM01A |
| Lamp | MR16, not included |
| Max wattage | Up to 50 W |
| Body | Solid brass |
| Sleeve | PVC, buried |
| Lens | Clear flat glass |
| Top cover | Flush |
| Fitting | 98 mm Ø × 96.5 mm |
| With sleeve | 112.5 mm Ø × 147.5 mm |
| Ingress | IP68 |
| Supply | 9–17 V AC/DC |
| Lead | 1.83 m, 16 AWG SJTW |
| Finish | Antique Bronze |
Fitting and sleeve dimensions follow the separate DM01A dimension drawing. Lamp values are set by the MR16 fitted and are not a property of the housing.
Top covers
The same brass body takes four interchangeable top covers. The cover is specified per fitting and changes how the fitting is read from a path, not what it is.
| Flush, DM01A | Level face ring. The default. |
| Louvre, DM01B | Linear shielding across the aperture. Use where the fitting is viewed along a path. |
| Covert, DM01C | Shielded aperture for maximum concealment of the source. |
| Half-dome, DM01D | Directional output near grade, for washing a surface rather than uplighting. |
Dimensions
Dimensions in millimetres. Tolerance ±0.5 mm.