← Fixtures
Spike series
SD-08
Heavy-duty brass spike uplight for trees and canopies at height. Lamp not included.
Start a project enquiry →Application
A die-cast brass spike uplight for MR16 lamps, built around a drop-in lamp holder and a heavier housing than the rest of the range. The barrel runs 157.4 mm against the LT2101’s 125.4 mm, sitting between the compact LT2101 and the long-shroud LT2108 for cut-off.
Aim it up the trunk into a canopy, 300 to 600 mm off the base for a mature specimen. Photometrics follow the lamp fitted, so the same housing covers a tight column through to a wider spread.
Start a project enquiry →Specification
| Lamp | MR16, not included |
| Max wattage | Up to 50 W |
| Lamp output | 450 lm (LT1016A) |
| CCT | 2700 K (lamp) |
| CRI | 85 (lamp) |
| Beam | 15° (lamp) |
| Body | Die-cast brass |
| Lens | Clear glass |
| Dimensions | 56.0 mm Ø × 157.4 mm |
| Ingress | IP65 |
| Supply | 9–17 V AC/DC |
Lamp values are for the LT1016A MR16, a different MR16 changes output, beam and CRI.
Dimensions
Dimensions in millimetres.